Build 2.7.2.122 (09-01-2023) 
Fixes: 
- 0005017: [Import] Some objects missing within cutouts in ODB++ polygons
- 0004993: [Panel] Script rout diameter not preserved when creating panel
- 0004971: [Panel] Problem with exported profile if panel has 0mm frame width
- 0004996: [Panel] Problem with combined routing and scoring

Build 2.7.1.121 (03-11-2022) 
Tweaks: 
- 0004970: [Import] Allow flex stackup with stiffener outside of cover layer 
- 0004965: [Test fixture] Extract gbr/dxf file of Test Circuitry PCB from test fixture 
Fixes: 
- 0004987: [Panel] Can not save panel with board as coupon 
- 0004985: [PreCAM ver] Can not save settings if no holiday file is specified

Build 2.7.0.120 (28-07-2022) 
New features: 
- 0004948: [Browser] Simple PCB Editor: Crop all features outside of PCB contour 
- 0004944: [Browser] Simple PCB Editor: Delete selected features 
Tweaks: 
- 0004954: [Browser] New license server and offline option 
Fixes: 
- 0004931: [Panel] Mousebite holes not shown in panel drawing if <0.3mm

Build 2.6.4.117 (27-06-2022) 
New features: 
- 0004808: [Test fixture] Export electronics board outline and hole locations in DXF format 
- 0004851: [EMS ver ADM]: Add additional search text to component search parameters 
Tweaks: 
- 0004915: [Import] Drills pane: Show long drill file names as hint 
- 0004912: [Import] Drill map file should not be autolinked to Drill 
- 0004903: [Import] Add '@' to supported characters in text font 
- 0004911: [Test fixture] Increase max active area for MIT fixture 
- 0004874: [EMS ver ADM]: Add Autolink to Octopart icon 
- 0004870: [EMS ver ADM] Add unit price to Component pricing estimator 
- 0004878: [PreCAM ver Price Editor] Several usability tweaks 
- 0004877: [PreCAM ver Price Editor] Allow moving price elements up/down within price section 
Fixes: 
- 0004885: [Browser] AV if no file selected 
- 0004875: [Browser] Oval pads incorrectly drawn in PDF layer drawing 
- 0004901: [Import] Parser report warnings should not show for solder mask files 
- 0004905: [MIF] Text output generates invalid Gerber arcs 
- 0004902: [Panel] Datamatrix is missing the bottom line of the finder pattern 
- 0004879: [Price] Price element not applied under certain circumstances 
- 0004930: [Stencil] Round option on frame selection fails 
- 0004916: [Stencil] Creating Stencil from 247973 causes some of the 45deg. pads to vanish 
- 0004917: [Test fixture] Dimensions not restored after local save 
- 0004884: [Test fixture] Test pin continuation list incorrectly printed 
- 0004887: [EMS ver ADM] "µ" is incorrectly imported from BOM to ADM 
- 0004880: [PreCAM ver Price Editor] Price element not applied if apply parameter is list type and apply method is param in list

Build 2.6.3.116 (03-03-2022) 
Tweaks: 
- 0004842: [Import] The on publish check list is partly missing the first letter 
- 0004853: [EMS ver ADM] Add Ctrl+D shortcut to search in Octopart search dialog 
- 0004852: [EMS ver ADM] Auto search when opening Octopart search if manufacturer and MPN specified 
- 0004849: [EMS ver ADM] Update product specs when closing ADM 
- 0004848: [EMS ver ADM] In Octopart search, check for manuf. name should not be case sensitive 
- 0004846: [EMS ver ADM] Layer visibility when showing instances 
- 0004844: [EMS ver ADM] Select component if exact match in Filter function 
- 0004840: [EMS ver ADM] Change Save button to OK in component editor 
Fixes: 
- 0004857: [Import] Stackup info missing after loading .mei file 
- 0004843: [Import] AV when importing .mei file 
- 0004861: [Panel] On publish, the product's panel and stackup drawings get corrupted 
- 0004864: [Stencil] Cannot split opening to array larger than 2x2 
- 0004797: [Stencil] Bug in edit shapes height/width 
- 0004850: [EMS ver ADM] When importing BOM, the original file does not get saved with the product 
- 0004841: [EMS ver ADM] If a space is found in Designator line - ADM will keep asking you if you want to use it as separator 
- 0004856: [EMS ver Test fixture] Location and diameter data for test pins incorrect when temporarily saving 
- 0004836: [EMS ver Test fixture] List index out of bounds error when deleting pin

Build 2.6.2.115 (31-01-2022) 
Fixes: 
- 0004834: [Browser] Content of boards is missing from PDF drawings of panelized product

Build 2.6.2.114 (27-01-2022) 
Tweaks: 
- 0004830: [Browser] It should be possible to delete export profiles 
- 0004802: [Panel] Barcode and Datamatrix on legend should not have inverted colors 
- 0003902: [Panel] Changes to panel drawing 
- 0004823: [EMS ver ADM] Add designators to components report, and MPN to placement report 
Fixes: 
- 0004832: [Import] Some 0-layer stackups do not display properly in stackup chooser 
- 0004824: [Import] If copper top is unlinked, it can still be selected as active layer in Outline 
- 0004822: [Import] List index out of bounds (0) when using ctrl+select in Outline 
- 0004817: [Import] Slot in drill file is rotated incorrectly 
- 0004810: [Import] inserting data matrix code sometimes gives range check error 
- 0004807: [Import] Importing separate bottom PnP file adds components to top 
- 0004806: [Import] Can not link more than one user layer when importing ODB++ 
- 0004794: [Import] Misleading error message if outline primitive has too few vertices 
- 0004791: [Import] MIsleading error message when importing ODB++ files: no plated holes specified 
- 0004803: [Panel] Datamatrix is not placed according to the moving rectangle 
- 0004814: [EMS ver ADM] Missing columns in BOM components and placement reports 
- 0004831: [EMS ver Test fixture] Panel instances not offset properly

Build 2.6.1.113 (04-10-2021) 
Tweaks: 
- 0004784: [Viewer] Show info on x-key snap placement 
- 0004787: [EMS ver ADM] Select component in search dialog without changing search texts 
- 0004786: [EMS ver ADM] Button to expand only component level in component list 
Fixes: 
- 0004785: [Import] Range check error when selecting 10-layer stackup 
- 0004783: [Import] Test pads bottom layer not saved if IPC file not automatically recognized 
- 0004782: [EMS ver ADM] Component layer is visible but the visibility checkbox is not checked 
- 0004781: [EMS ver ADM] Designator filter does not work 
- 0004788: [Pro Version Price Editor] Unknown property error in price element edit dialog

Build 2.6.0.112 (28-09-2021) 
New functionality: 
- 0004736: [Import] Support for IPC-D-356 test pad data 
- 0003817: [Stencil] Modify stencil openings by footprint (using IPC-D-356 data) 
- 0004780: [EMS ver ADM] BOM Import: Exclude components from Equiv or better by designator 
- 0004748: [EMS ver ADM] Mark individual instances with "alert" 
- 0004747: [EMS ver ADM] Ctrl+Alt+Click on component in viewer to locate it component list 
- 0004735: [EMS ver ADM] Extract key pin and outline data from IPC-D-356 test pad data 
- 0003501: [EMS ver Test fixture] Extract signal name, designator and pin number from IPC-D-356 test pad data 
Tweaks: 
- 0004734: [Import] Add menu item to change entire drill file between plated/unplated 
- 0004755: [EMS ver ADM] Add Battery component class 
- 0004751: [EMS ver ADM] Change MPN of selected instance 
- 0004749: [EMS ver ADM] Make PnP import dialog sizable 
- 0004746: [EMS ver ADM] Add buttons to zoom/highlight selected instance or all instances 
- 0004745: [EMS ver ADM] Make it possible to copy original description text 
- 0004744: [EMS ver ADM] Component search: Check boxes for selecting MPN and alternates 
- 0004777: [EMS ver Test fixture] Delete pin from pin list 
- 0004753: [EMS ver Test fixture] Improved documentation set for test fixture 
Fixes: 
- 0004750: [Browser] "Product not found" error message when viewing global products 
- 0004740: [Browser] Dormant products should not be displayed after making product dormant 
- 0004737: [Browser] Component layers should be included in documentation set 
- 0004769: [Import] Altium fixed-width PnP file in mils scaling error 
- 0004757: [Import] Text for blind bottom file depth is too large for grid column 
- 0004756: [Import] Can not place adhesive layer in custom stackup 
- 0004754: [Import] Integer overflow on autocontour 
- 0004738: [Import] Orig diameter is displayed incorrectly in tool list 
- 0004728: [Import] Min annular ring shows incorrectly if no plated holes 
- 0004766: [EMS ver ADM] Can not import BOM from file stored in product 
- 0004752: [EMS ver ADM] Add new component does not place precisely 
- 0004739: [EMS ver ADM] Problem deleting component outline 
- 0004776: [EMS ver Test fixture] Cancel pin creation does not exit properly 
- 0004774: [EMS ver Test fixture] Integer overflow when calculating centroid for large qty of pins

Build 2.5.1.110 (14-07-2021) 
New functionality: 
- 0004727: [EMS ver ADM] Add text search for all cells in BOM view 
Tweaks: 
- 0004721: [Import] Check for castellated holes after rescaling drill 
- 0004722: [EMS ver Test fixture] Allow larger active area for integrated jig 
- 0004712: [EMS ver Test fixture] Add product number to name of STEP file on publish 
Fixes: 
- 0004726: [Import] Zero-length arcs when importing ODB++ data 
- 0004725: [Stencil] Display issue with help texts 
- 0004718: [Viewer] 3D files for integrated test jigs are shown with wrong color 
- 0004711: [EMS ver ADM] Hide modes ignored when refreshing component tree 
- 0004716: [EMS ver Test fixture] Integrated test jig test circuitry support pin location issues

Build 2.5.0.109 (16-06-2021) 
New functionality: 
- 0004685: [EMS ver Test fixture] Support for Integrated Test Jig fixture 
- 0004589: [EMS ver Test fixture] Extract test point locations from Component layer 
Tweaks: 
- 0004705: [Panel] Reduce minimum bar code height to 5.0mm 
- 0004454: [Stencil] Highlight aperture(s) that give minimum aspect/area ratio 
- 0004694: [EMS ver ADM] BOM Import: Automatically identify designator separator if comma, semicolon or space found 
- 0004693: [EMS ver ADM] BOM Import: Add additional Value columns 
- 0004692: [EMS ver ADM] BOM Import: Allow hyphen as valid designator character 
- 0004691: [EMS ver ADM] BOM Import: Allow marking caps/res as equivalent or better 
- 0004690: [EMS ver ADM] BOM Import: Clear all settings 
- 0004689: [EMS ver ADM] BOM Import: Search and replace in selected grid column 
- 0004683: [EMS ver ADM] Delete equiv or better, or all alternates 
- 0004679: [EMS ver ADM] It should be possible to un-mark a checked item from the popup menu 
- 0004677: [EMS ver ADM] Component search module short cut changed from Ctrl+O to Ctrl+D 
- 0004699: [EMS ver Test fixture] Add option to upload 3D (step) file for PCB. 
- 0004668: [EMS ver Test fixture] Add pressed mass center location on fixture publish 
Fixes: 
- 0004706: [Browser] Test fixture board center incorrectly displayed 
- 0004703: [Import] Bevel definition crashes in certain situations 
- 0004700: [Import] Countersink holes cause via filling to be true 
- 0004696: [Import] Depth controlled routing does not get saved properly 
- 0004687: [Import] Recognizer identifies csv file as Gerber file 
- 0004682: [Import] Extra drill tool imported, though not in drill file 
- 0004707: [Stencil] Generic stencils generated with wrong size 
- 0004701: [Stencil] Not possible to set positive adjustment (reduction) value 
- 0004680: [Stencil] Newly created stencil frames will not be shown 
- 0004695: [EMS ver ADM] Some changes not saved when product saved 
- 0004688: [EMS ver ADM] Problem importing PnP from attached file 
- 0004678: [EMS ver ADM] Imported file stored in product is empty 
- 0004676: [EMS ver ADM] Hide components with BOM status approved does not work. 
- 0004675: [EMS ver ADM] Focus issue in component list

Build 2.4.5.108 (06-05-2021) 
Tweaks: 
- 0004673: [Import] Disable custom material for thermal dielectric layers 
- 0004661: [Import] Allow slot widths >= 0.25mm for depth routing 
- 0004666: [EMS ver ADM] Add menu commands to expand/collapse selected item in list 
- 0004665: [EMS ver ADM] More options to hide components in list 
- 0004664: [EMS ver ADM] Allow designator ranges (C13-C25) in search 
- 0004662: [EMS ver ADM] Caption and icon changes to reduce confusion about approval and placement style 
Fixes: 
- 0004670: [Import] Integer overflow when displaying arc with very large radius 
- 0004671: [Panel] Outer dimension controls do not work as expected with scoring 
- 0004667: [EMS ver ADM] Unidentified "parts not found" 
- 0004663: [EMS ver ADM] Access violation importing PnP bottom data

Build 2.4.4.107 (12-04-2021) 
Tweaks: 
- 0004653: [Import] Allow depth routing with diameter up to 10mm 
- 0004651: [EMS ver ADM] Enable Swap Layer only when instance is selected 
- 0004643: [EMS ver ADM] Give unique description when creating component 
- 0004533: [EMS ver ADM] Allow import of XLSX and ODS files for BOM 
Fixes: 
- 0004644: [Browser] Export profiles do not get saved properly 
- 0004652: [Import] Via plugging assigned to wrong tool 
- 0004646: [Import] Problem importing Gerber As Drill file with cutouts 
- 0004641: [Import] Drill tool plating gets ignored even though defined in file header comment 
- 0004654: [Stencil] Problem editing stencil 
- 0004645: [Stencil] Frame text does not get deleted from stencil 
- 0004649: [EMS ver ADM] Keyboard arrow button does not work in Edit boxes in edit component

Build 2.4.3.106 (24-03-2021) 
Tweaks: 
- 0004634: [EMS ver ADM] EMS: Function to automatically link to Octopart (if possible) 
- 0004628: [EMS ver ADM] Add separate functions to mark as approved for Placement/BOM 
- 0004626: [EMS ver ADM] Clear all components 
Fixes: 
- 0004637: [Import] Problems editing tool diameters 
- 0004631: [Panel] Can not rotate board if scoring is enabled 
- 0004627: [EMS ver ADM] Component counts not saved properly 
- 0004625: [EMS ver ADM] Some rotations are incorrect when importing PnP from Altium

Build 2.4.2.105 (11-03-2021) 
Tweaks: 
- 0004618: [EMS ver ADM] Components with FB designators should be Inductors 
Fixes: 
- 0004615: [Import] Integer overflow on import 
- 0004622: [Panel] Slots disappear when editing existing panel 
- 0004620: [Panel] Can not set frame width less than 3mm 
- 0004619: [EMS ver Pallet] Integer overflow when generating rout files for pallet

Build 2.4.1.104 (03-03-2021) 
Tweaks: 
- 0004603: [EMS ver ADM] Add "save settings" check box to Import BOM dialog 
- 0004602: [EMS ver ADM] Check that description and/or manuf part # column is specified 
Fixes: 
- 0004599: [Import] ODB++ issue with certain symbol pads 
- 0004608: [Panel] Problems with shortcut keys 
- 0004600: [Panel] Out of range error when opening panel module 
- 0004604: [EMS ver ADM] Shortcut keys to view layers not working 
- 0004601: [EMS ver ADM] Error importing BOM in text/csv format

Build 2.4.0.103 (23-02-2021) 
New functionality: 
- 0004448: [Import] Allow marking drill tools as countersink 
- 0004453: [Import] Add conformal coating top/bottom layers 
- 0004441: [Panel] Panel scripts with fixed panel size 
- 0004156: [Panel] Add board as test coupon 
- 0004130: [Panel] Scripts with only frame objects 
- 0004127: [Panel] Disable board rotation in script 
- 0002840: [Panel] Add text object to scripts 
Tweaks: 
- 0004556: [Import] If zip contains both Gerber and ODB++ data, ask which to use 
- 0004307: [Import] Increase data resolution from 100 nm to 1 nm 
- 0004440: [Panel] Add notch to panel edge 
- 0004562: [Panel] Add diamond and octagon as fiducial shapes 
- 0004173: [Panel] Warn when no room to place IPC-2221 Z coupon 
- 0004565: [Viewer] Show angle in measurement display 
- 0004591: [EMS ver ADM] Add Test point as component class 
- 0004577: [EMS ver ADM] Option to ignore DNP components in price estimator 
- 0004566: [EMS ver ADM] Approved component counts based on Approved for BOM 
- 0004563: [EMS ver ADM] Add Fuse and Crystal component classes 
Fixes: 
- 0004412: [Browser] Circuit data stackup interpretation problems 
- 0004570: [Import] Hard gold area calculated wrong 
- 0004561: [Import] Slot drill in Gerber As Drill file not imported correctly 
- 0004555: [Import] Error in ODB++ parser 
- 0004552: [Import] Cannot re-link unlinked GerberAsDrill file 
- 0004010: [Import] Can't select all contour objects in one go 
- 0004553: [Other] Stackup drawing scale is wrong in some cases 
- 0004568: [Panel] Access violation when placing IPC-2221 Z coupon

Build 2.3.5.101 (17-12-2020) 
Fixes: 
- 0004549: [Browser] Exporting slot drill to XNC causes endless loop

Build 2.3.4.100 (11-12-2020) 
Tweaks: 
- 0004540: [ADM] Several tweaks and fixes 
- 0004535: [Import] Can not read Gerber files which lack I or J value 
Fixes: 
- 0004545: [Browser] Drill files exported as Gerber when XNC requested 
- 0004546: [Browser] Mixed drill layer not split to separate plated/unplated files on export 
- 0004539: [Import] DXF import - polyline "bulge" arcs become straight lines

Build 2.3.3.99 (19-11-2020) 
New functionality: 
- 0004437: [ADM] Mounting type column in BOM import 
- 0004462: [Import] Limited import of dxf 
Tweaks: 
- 0004516: [ADM] BOM fields and sorting during import BOM in ADM 
- 0004480: [ADM] User experience tweaks 
- 0004438: [ADM] Multiple Supplier/SKU columns in imported BOM 
Fixes: 
- 0004532: [Browser] File extensions missing on export using Macaos File Name profile 
- 0004522: [ADM] Problem importing PnP with missing values 
- 0004529: [ADM] Choose fiducial mounting style

Build 2.3.2.98 (11-11-2020) 
Fixes: 
- 0004530: [Browser] Can not export stencil product to Gerber 
- 0004526: [MIF] DNP component property not saved to MIF file 
- 0004523: [Panel] Copper fill is displayed incorrectly 
- 0004528: [Pro Version Quote] Price breakdown does not display correctly after editing price

Build 2.3.1.96 (28-10-2020) 
Fixes: 
- 0004518: [Browser] The Profile Gerber file does not get exported 
- 0004520: [Import] Problem reading Gerber files with format spec but without apertures 
- 0004515: [Import] Parsing should not fail if comma but no rotation parameter in circle primitive 
- 0004500: [Import] Warning of empty file when last set is empty 
- 0004497: [Test fixture] Cannot edit a saved test fixture with flipped board 
- 0004512: [Viewer] Polygons not drawn correctly

Build 2.3.0.95 (21-10-2020) 
Fixes: 
- 0000000: [Pro version] Unable to fetch quotation template

Build 2.3.0.94 (19-10-2020) 
New functionality: 
- 0004451: [ADM] New Assembly Data Manager module 
- 0004266: [Browser] Single-board product editor module 
- 0004450: [Import] Support for all features of current version of Gerber Format (2020.09 with X3 extensions) 
- 0003943: [Stencil] Add Aspect and area ratio calculations 
Tweaks: 
- 0004157: [Browser] Improve behaviour when license is expired 
- 0004510: [Import] Statistics display improperly before outer contour is defined 
- 0004421: [Import] It should be possible to create inner contour objects from polygons 
- 0003847: [Import] Warn of unsupported G41/G42 compensation when importing excellon file 
- 0004432: [Other] Show toolbar button captions below icons 
- 0004471: [Panel] Allow to create panels with flex boards defined with laser outline 
- 0004376: [Panel] Do checks allow saving before the save dlg is shown 
Fixes: 
- 0004416: [Import] Cannot parse Gerber obround flash as slot 
- 0004413: [Import] Issues with Gerber Job import from kicad 
- 0004405: [Import] Warn about unspecified tool dias prior to laser cutter warning 
- 0004445: [Stencil] Program hangs on Rotate Frame if view is rotated 
- 0004390: [Stencil] Run-time error when reducing butterfly openings

Build 2.2.2.93 (18-12-2019) 
Fixes: 
- 0004382: [Depanel] Duplicate tab removal segments in some cases 
- 0004387: [Import] PnP layer does not get published 
- 0004385: [Import] MEI files saved to local disc can't be imported again 
- 0004365: [Import] Depth routing issues 
- 0004364: [Import] ODB++ Plated slot tools show as unplated in drill tool list 
- 0004380: [Panel] Copper fill cut-out mis-placed after rout width change

Build 2.2.1.92 (11-12-2019) 
Fixes: 
- 0004386: [Browser] Some files not exported if only one drill file format selected

Build 2.2.0.91 (10-12-2019) 
New functionality: 
- 0003236: [Assy Data] Improve PnP import options 
- 0004384: [Browser] It should be possible to enter network paths in config dialog 
- 0004321: [Browser] Select drill file format and extra files on export 
- 0004315: [Browser] User definable PnP output format 
- 0004360: [Import] Support for backdrill layers 
- 0004318: [Import] Allow user to specify PnP file format if unrecognized 
- 0004230: [Import] Mark holes as press-fit 
- 0004229: [Import] Laser outer/inner cutter for flex boards 
- 0003909: [Pallet] Pallet designer module for solder pallets 
- 0004323: [Pro Version Price Editor] Support for multiple shipment methods 
- 0004372: [Stencil] Add function to transfer tooling holes from panel to stencil 
- 0004128: [Stencil] Generic stencil frame should have rounded corners 
- 0004212: [Test fixture] PCB as test fixture 
Tweaks: 
- 0004337: [Browser] Update CircuitData to version 2 
- 0004331: [Depanel] Change suction cup holder for 4, 6 and 8 mm cups 
- 0004300: [Depanel] Do not allow pedestals to overlap 
- 0004283: [Depanel] Improved auto-detection of tabs 
- 0004322: [Import] GerberJob updated to support rev 2019.09 
- 0004275: [Import] Display board size before showing automatic contour message 
- 0004373: [Pro Version Quote] Add sellers ref no. to quotation 
- 0004371: [Stencil] Allow stencil frames/products without any text and smaller text size 
- 0002219: [Stencil] Duplicate stencil opening modifications to all boards in panel 
Fixes: 
- 0004377: [Browser] Product list filter ignores subfolders 
- 0004368: [Browser] Can not change file extension for inner layers in export profile 
- 0004343: [Import] Cannot link file if incorrectly linked to Drill 
- 0004341: [Import] Set legend color to White when creating layer for symbol 
- 0004316: [Import] Access violation in link filter manager 
- 0004290: [Import] Some mech products get zero volume after import 
- 0004288: [Import] Access violation importing Gerber as Drill file with polygon regions 
- 0004285: [Import] Error message when loading CircuitData materials database 
- 0004378: [Panel] Inserting a reg. control coupon, causes DB error 
- 0004353: [Panel] Problem adding new board to existing panel 
- 0004303: [Panel] Rout compensation can give undesired results in some cases 
- 0004301: [Panel] A 4-layer board gets wrong buried drill layer name after flip 
- 0004292: [Panel] Rout width does not always change properly when user selects another rout width 
- 0004369: [Stencil] Stencil issues 
- 0004347: [Stencil] Generic frame was unselected 
- 0004334: [Viewer] Copper thickness is sometimes shown wrong for special stackups

Build 2.1.8.90 (23-08-2019) 
Fixes: 
- 0004302: [Panel] Break-off tabs do not show properly in panel drawing 
- 0004308: [Pro Version Price Editor] Access violation when changing price in Price Wizard grid

Build 2.1.7.89 (18-06-2019) 
Fixes: 
- 0004274: [Browser] Plated through drill layer not exported

Build 2.1.7.88 (12-06-2019) 
Tweaks: 
- 0004272: [Test fixture] Timer on max/min check for fixture size should be lengthened 
Fixes: 
- 0004273: [Panel] Soldermask disappears from panel frame

Build 2.1.6.87 (07-06-2019) 
New functionality: 
- 0004268: [Panel] Allow editing solder mask as an assembly mask 
- 0004251: [Panel] Remove solder mask from around break-off tabs 
Tweaks: 
- 0004271: [Browser] When exporting to Gerber, split plated/unplated through drill layer Gerber files 
- 0004265: [Depanel] Allow for offset between reg holes and milling program 
- 0004112: [Depanel] Generation of 3D IGES file for depanel fixture 
- 0004267: [Panel] Allow milling track to cross scoring line into waste matl 
Fixes: 
- 0004270: [Browser] Incorrect file function in exported unplated XNC file 
- 0004269: [Import] "import board product specs" should ignore qty board per panel

Build 2.1.5.86 (21-05-2019) 
New functionality: 
- 0004248: [Browser] It should be possible to export PTH and NPTH in separate files 
- 0004249: [Panel] Allow milling track to cross scoring line on board corners 
Tweaks: 
- 0004234: [Assy Data] Add note that PnP must include fiducials 
- 0004250: [Browser] Exported Excellon files should be XNC compliant 
- 0004261: [Depanel] Make it possible to not have a dust nozzle 
Fixes: 
- 0004260: [Import] Allegro PnP file not scaled properly 
- 0004258: [Import] Problems with depth routing in ODB++ 
- 0004245: [Panel] Problems with v-cut when editing panel 
- 0004262: [Test fixture] Can not place test pins on flipped board

Build 2.1.4.85 (25-04-2019) 
Fixes: 
- 0004239: [Import] Text file viewer does not size correctly 
- 0004246: [Panel] Panel property controls hidden when opening Actions menu 
- 0004236: [Panel] Out of bounds error when creating remark

Build 2.1.3.84 (11-04-2019) 
New functionality: 
- 0003802: [Import] Import board specs from CircuitData 
Tweaks: 
- 0004186: [Depanel] Warn if fixture is too near rout table edge 
- 0004053: [Import] Some flex import tweaks 
- 0004040: [Import] Add minimum feature functions to view mode menu 
- 0004221: [Panel] Allow changing rout width 
- 0004224: [Viewer] Show flex layers slightly wider in rigid-flex stackup 
- 0004167: [Viewer] Add minimum feature functions to view mode menu 
Fixes: 
- 0004215: [Depanel] Alignment holes missing from NC file for depanel fixture product 
- 0004217: [Import] Can not add adhesive layer beside cover layer 
- 0004207: [Import] Stackup drawing in PDF does not draw thin/flex boards properly 
- 0004203: [Import] Can not deselect contour segments 
- 0004231: [Pro Version Price Editor] AV when opening "empty" price list in wizard 
- 0004211: [Test fixture] Fixture sizes can not be adjusted 
- 0004202: [Test fixture] Misleading message when opening test fixture designer

Build 2.1.2.83 (01-04-2019) 
Fixes: 
- 0004218: [Browser] AV when opening assy data mgr 
- 0004211: [Test fixture] Fixture sizes can not be adjusted

Build 2.1.1.82 (13-02-2019) 
Tweaks: 
- 0004181: [Import] Set color None for flex board with cover layer and no solder mask 
- 0004175: [Import] Gerber macro vector line uses depracated specification 
- 0004166: [Import] Board size not displayed after autocontour 
Fixes: 
- 0004183: [Stencil] Scripts are not activated when loading data from files

Build 2.1.0.81 (01-02-2019) 
New functionality: 
- 0004172: [Browser] Export CircuitData file of product 
- 0004168: [Browser] File history 
- 0003993: [Panel] Add impedance test coupon to panel frame 
- 0004169: [Pro Version Quote] Import RFQ from Macaos Enterprise 
- 0004152: [Pro Version Quote] Disable price list 
- 0003803: [Pro Version Quote] Import product specs for quotation from CircuitData or Gerber Job file 
Tweaks: 
- 0004076: [Import] Support for additional PnP formats 
- 0004153: [Pro Version Quote] Cannot specify blind/buried when free specs 
Fixes: 
- 0004165: [Import] Capped and Tented Via's in ODB++ are incorrect 
- 0004161: [Import] Selected stackup disappears when placing UL mark

Build 2.0.2.80 (17-12-2018) 
Tweaks: 
- 0004139: [Browser] Improved explanation of various outline files in ProductInfo.txt 
- 0004129: [Browser] Expanded support for export profiles 
- 0004144: [Import] Selected inner contour not shown 
- 0004142: [Stencil] Add possiblity to scale and change size of features when moving features to paste layer 
- 0004113: [Stencil] Add tooling holes to stencil 
Fixes: 
- 0004147: [Import] Solder mask is set to green for both sides of a single sided board 
- 0004146: [Import] Rotated oval pads with holes are not exported with rotation 
- 0004133: [Import] Problem recognizing drill file containing multiple files 
- 0004126: [Import] Warn if number of linked files does not match selected number of layers 
- 0004137: [Stencil] Shape splitter window can't open

Build 2.0.1.79 (21-11-2018) 
Tweaks: 
- 0004121: [Test fixture] Width of USB connector is wrong 
Fixes: 
- 0004118: [Browser] Filenames in gbrjob file are wrong 
- 0004106: [Depanel] Some arc tabs have wrong arc direction 
- 0004102: [Depanel] Position of nozzles are wrong at startup 
- 0004125: [Import] Outer contour gets wrong tool size on autocontour 
- 0004120: [Import] ODB++ imports some user shapes with wrong dimensions 
- 0004119: [Import] Can not select 4-layer stackup 
- 0004103: [Import] Most layers missing from product published from ODB++ 
- 0004124: [Panel] Rotated boards not displayed correctly rotatated or mirrored view 
- 0004123: [Stencil] Selected fiducials not exported 
- 0004115: [Stencil] Can not deselect visible layers in viewer 
- 0004114: [Stencil] Problems with transfer objects

Build 2.0.0.78 (12-11-2018) 
New functionality: 
- 0004100: [Browser] Include GbrJob file when exporting to Gerber 
- 0004062: [Browser] Support for subfolder management 
- 0004066: [Depanel] Depanelization module 
- 0003915: [Import] Allow defining "missing" layer in custom stackup 
- 0003971: [Panel] Specify panel outer dimensions 
- 0003631: [Panel] Allow placing tooling holes/fiducials relative to panel center 
- 0004064: [Pro Version Quote] Enable price inspector in Quote dialog 
- 0003978: [Viewer] Show minimum copper to unplated edge clearance in viewer 
- 0003982: [Other] Use more consistent look/feel across all modules 
- 0003979: [Other] Expanded connection manager 
Tweaks: 
- 0004020: [Import] Highlight selected contour object 
- 0003960: [Import] Show Symbols layer when showing top/bottom layers 
- 0004067: [Panel] Allow selecting bad marks for only boards or only panel in autopanel 
- 0004007: [Panel] Instance spacing should not be reset when changing instance count 
- 0003989: [Stencil] Automatically convert simple polygons to flash pads 
- 0004087: [Viewer] Show cover layer for flex boards 
Fixes: 
- 0004033: [Browser] Problem with long filenames when exporting to Gerber 
- 0004085: [Import] Zero-length drawn pads should not be ignored 
- 0004031: [Import] Stackup sets the flex / rigid-flex style incorrectly 
- 0004021: [Import] Primitives in Gerber macros are rotated around the wrong origin 
- 0003985: [Import] Inner layers not listed in correct order 
- 0003959: [Import] EP mark and UL mark does not seem to get saved 
- 0004006: [Panel] Panel believes straight edge is round and makes circular outline 
- 0003996: [Panel] Panel report does not support fiducials with cross shape 
- 0004104: [Pro Version Price Editor] Grid data disappears from price wizard 
- 0004065: [Pro Version Quote] Price lists may not have unique ID numbers

Build 1.7.5.77 (26-06-2018)
Fixes:
- 0003994: [Import] Access violation when saving certain ODB++ products
- 0003977: [Import] Error in estimating min. hole-cu distance
- 0003976: [Import] Drill parser fails on block with M08M30
- 0003965: [Import] Via protection layer missing after save
- 0003962: [Import] Drill files do not link to correct Gerber X2 drill depths
- 0003974: [Panelization] Frame objects sometimes placed within boards
- 0003973: [Panelization] plated slot diameter rounded up after panalization

Build 1.7.4.76 (28-05-2018)
Fixes:
- 0003968: [Pro version] Access violation when opening quote dialog with newly imported product

Build 1.7.3.75 (07-05-2018)
Tweaks:
- 0003961: [Other] Require users to confirm privacy policy (GDPR confirmation)
Fixes:
- 0003958: [Import] Pressing Ctrl+s shows Enterprise warning message
- 0003956: [Import] Automatic feature estimations fail for outer layers

Build 1.7.2.74 (23-04-2018)
Tweaks:
- 0003918: [Import] Select user-defined stackup material from CircuitData database
Fixes:
- 0003949: [Import] Symmetric stackup gets warning about not symmetric
- 0003946: [Import] Can not set nominal thickness to 50µm
- 0003940: [Import] Can not specify dielectric thickness for 1-layer MBB
- 0003747: [Panelization] A few issues with scratch elements in panels
- 0003935: [Stencil] Can not open Gerber file
- 0003936: [Test fixture] Allow test pin pitch of 1.25mm for R50 pins

Build 1.7.1.73 (21-03-2018)
Fixes:
- 0003928: [Import] Can not specify number of different products in panel
- 0003913: [Import] Problems defining custom stackup for 1-layer MBB
- 0003914: [Import] Layer-specific matl does not load properly when editing custom stackup
- 0003932: [Pro Version Archive] Data type error when viewing quotation
- 0003926: [Stencil] Loading outline data from gerberfile caused access violation
- 0003819: [Stencil] Delete stencil objects, sometimes deletes other objects than the ones selected

Build 1.7.0.72 (28-02-2018)
New functionality:
- 0003857: [Import] Import board specs from Gerber .gbrjob file
- 0003801: [Import] Allow for refresh of import files
- 0001710: [Import] Improved support for flex/flex-rigid stackups
- 0003766: [Stencil] Options for stencil: coated, polish
Tweaks:
- 0003873: [Import] Unsupported PnP file
- 0003783: [Panelization] Easy exchange of x/y placement of objects
- 0003859: [Test fixture] Redraw after changing jig or fixture style
- 0003856: [Viewer] Show drill depths in stackup viewer
- 0003837: [Viewer] Show coverlayer when showing top/bottom side of a flex board
Fixes:
- 0003903: [Import] AutoContour selects too large tool for outer contour with notches
- 0003889: [Import] Multi-quadrant arc slots in excellon file incorrectly imported
- 0003888: [Import] Min rout dia not always rounded properly
- 0003887: [Import] Remark layer missing from imported product
- 0003871: [Import] Min buried diameter not calculated for ODB++ jobs
- 0003863: [Import] Unlinking files fails
- 0003852: [Import] Eagle PnP file not recognized if field contains space
- 0003842: [Import] Slots in drill/milling files not visible when viewing -single file
- 0003829: [Import] Error in contour file generation
- 0003895: [Panelization] Rigid board with outer rout diameter < 1mm causes program to crash
- 0003835: [Panelization] Problem with polygon intersection detection
- 0003894: [Other] Very small files get corrupted when extracting from zip
- 0003864: [Other] Add peel-off with Duplicate pads does not work
- 0003854: [Other] Error in reading files in some cases
- 0003865: [Viewer] Access violation, when doing a mouse scroll before date is loaded into a viewer

Build 1.6.3.71 (31-07-2017)
Tweaks:
- 0003732: [Pro Version Archive] Combine the three quote files into a single file
Fixes:
- 0003752: [Pro Version Archive] Factory price displayed incorrectly
- 0003739: [Pro Version Price Editor] Some issues with wizard

Build 1.6.2.70 (23-06-2017)
New functionality:
- 0003742: [Pro Version Archive] Move quotations to another folder in archive
Tweaks:
- 0003741: [Pro Version Archive] Show seller initials

Build 1.6.1.69 (21-06-2017)
New functionality:
- 0003731: [Pro Version Archive] Add support for subfolders in quotation archive
- 0003721: [Pro Version Archive] Additional columns in quotation archive
Tweaks:
- 0003737: [Pro Version Price Editor] Show choice list when specifying selector value
- 0003735: [Pro Version Price Editor] Additional price parameters
Fixes:
- 0003738: [Pro Version Price Editor] Selector chooses wrong category when param<=category
- 0003734: [Pro Version Price Editor] Some issues with wizard
- 0003733: [Pro Version Price Editor] Can not enter negative default value in curve editor

Build 1.6.0.68 (30-05-2017)
New functionality:
- 0003650: [Import] Place annotation field based on number of characters to write
- 0003651: [Panel] Place annotation field based on number of characters to write
- 0003630: [Panel] Replace board in panel
- 0003692: [Test fixture] Support for new Standard Macaos Test Jig
- 0003678: [Test fixture] Place static alignment pin along edge of board
- 0003584: [Test fixture] Allow user to specify/edit pin coordinates
Tweaks:
- 0003652: [Import] Should be possible to cancel UL mark placement with right mouse
- 0003705: [Panel] Break off holes should be symmetric on both sides of panel frame
Fixes:
- 0003716: [Pro version Quote] Order weight does not update when changing quote specs

Build 1.5.6.67 (24-05-2017)
Fixes:
- 0003709: [Import] Solder mask files have wrong Gerber X2 .FilePolarity
- 0003697: [Import] Core checkbox not set when editing aluminum core stackup
- 0003690: [Import] Not possible to change layer of drill file in the Files tab
- 0003694: [Panelization] Some contours get smaller tabs than the user selected after publish
- 0003695: [Viewer] Layer name for pick and place layers not shown
- 0003701: [Other] Submitting a bug report causes loss of connection

Build 1.5.5.66 (05-04-2017)
Tweaks:
- 0003688: [Browser] Search should not filter after each keystroke
Fixes:
- 0003687: [Import] Contour objects with 2.4mm diameter are not correctly specified
- 0003686: [Pro version] Editing shipping price should not change markup

Build 1.5.4.65 (29-03-2017)
Tweaks:
- 0003632: [Import] Possibility to specify default finish/colors
Fixes:
- 0003665: [Test fixture] Pressing Save without any pins defined causes access violation
- 0003675: [Pro version] Some users report difficulty selecting qtys/days due to font size
- 0003661: [Pro version] Color/finish not correctly constrained if mode is in-list/not-in-list

Build 1.5.3.64 (10-03-2017)
Fixes:
- 0003654: [Browser] Stencil data is missing from exported Gerber data
- 0003640: [Browser] About dialog displays zero date for when updates expire
- 0003605: [Browser] Polygon missing after export to Gerber if starts at X or Y = zero
- 0003645: [Import] Zoom to board / Zoom to all
- 0003643: [Import] Can't link drill files if filename incorrectly parsed
- 0003623: [Import] Some GerberX2 file function parameters are not mapped to correct layers
- 0003598: [Import] Cannot link "out of context" layers in ODB++
- 0003655: [Stencil] Stencil statistics not saved with product
- 0003624: [Stencil] Auto selection of panel fiducials fail
- 0003649: [Test fixture] Product name is not copied from board product
- 0003648: [Test fixture] Aligning of fixtures top and bottom
- 0003646: [Test fixture] Zoom to board / Zoom to all
- 0003644: [Test fixture] Saved test fixture with flipped board does not restore properly
- 0003615: [Test fixture] Reloading saved fixture shows edit dialog for pins without signal name

Build 1.5.2.63 (02-03-2017)
Fixes:
- 0003639: [Browser] Incorrect product info shown in Document set
- 0003636: [Browser] New product not properly selected after creating panel or stencil
- 0003635: [Browser] Browser fails if archive in UNC-defined path
- 0003638: [Stencil] Several bug fixes around new frame styles when storing frames locally
- 0003637: [Stencil] Improve method for fetching frames locally and from server
- 0003634: [Stencil] Could not delete frames from Frame Manager
- 0003633: [Stencil] Convert to Float error

Build 1.5.1.62 (28-02-2017)
Fixes:
- 0003626: [Import] ODB++: Rotated rectangular pads get enlarged rather than rotated
- 0003629: [Pro version] Start price shown in quote is not always correct

Build 1.5.0.61 (22-02-2017)
New functionality:
- 0003581: [Import] Quick contour mode
- 0003578: [Import] Ability to select obround pads as track objects
- 0003503: [Import] Specify inner contour or track rout as depth rout from top or bottom
- 0003601: [Stencil] Add possibility to change height or width of stencil openings by selection
- 0003475: [Stencil] Additional stencil product parameters
- 0003525: [Test fixture] Possibility for rotated text
- 0003517: [Test fixture] Z-dimension visualizer
- 0003491: [Test fixture] Would like to save partially finished test fixture for later use
- 0003399: [Pro version] Create price list from tables
- 0003394: [Pro version] Independently specified path to price files
- 0002139: [Pro version] Additional parameters in price engine
Tweaks:
- 0003580: [Import] 2-layer custom stackups should be defined with free thickness
- 0003574: [Import] Link filter tweak for Proteus
- 0003552: [Import] Options: Allow set warning threshold for small Track and Annular ring
- 0003380: [Import] Support for ferrite layer
- 0003431: [Order] Should be possible to include email and org# with invoice address
- 0003514: [Panel] Insert solder mask objects in cover layer
- 0002410: [Panel] Add more info to PanelReport.txt so it's easier to recreate a panel
- 0003583: [Test fixture] Should be possible to place pin even when multiple objects selected
- 0003567: [Test fixture] Select test fixture size within test fixture designer
- 0003558: [Test fixture] Selecting a fixture should not disable the Fixture designer
- 0003550: [Viewer] Add status text to see if the view is mirrored or rotated
- 0003621: [Pro version] Should be possible to send panel drawing together with quotation
Fixes:
- 0003593: [Import] Problem parsing ODB++ soldermask pad
- 0003590: [Import] X2 attribute causes access violation when linking to Board
- 0003577: [Import] .lst files sometimes make the program stop Autolink
- 0003575: [Import] Can not set product id mark
- 0003569: [Import] White square in corner of layers diagram if file has invalid drill depth
- 0003561: [Import] Some cutouts missing from polygon in ODB++ file
- 0003553: [Import] Disallow marking with UL-mark selected warning does not work properly
- 0003534: [Import] ODB++ fails in paint and scratch layers on publish
- 0003618: [Panel] Out of memory error when publishing very small Panels
- 0003607: [Panel] Access violation on publish on some panels
- 0003585: [Panel] Check for dark/clear when inserting objects in solder mask
- 0003555: [Panel] Creating panel from 212708 causes notch in board
- 0003554: [Panel] Autopanel: Checking scoring x/y does not activate modified
- 0003520: [Panel] Rounded/chamfered corners disappear when saving panel
- 0003620: [Product browser] Problem accessing network drives
- 0003582: [Test fixture] Board should not "unflip" after delete or move press point
- 0003572: [Test fixture] Can't place top fixture press pins outside of bottom fixture
- 0003556: [Test fixture] Moving the press point (green arrows) should not move the board
- 0003564: [Test fixture] Horizontal line of test point annotations offset in annotation layer

Build 1.4.3.59 (31-10-2016)
New functionality:
- 0003516: [Test fixture] Should be possible to flip board before making fixture
Fixes:
- 0003518: [Browser] Access violation when exporting to Gerber
- 0003519: [Stencil] Can not create stencil product
- 0003522: [Test fixture] Top fixture contour does not surround the slider holes

Build 1.4.2.58 (18-10-2016)
New functionality:
- 0003508: [Test fixture] Should be possible to add support pins to bottom fixture
- 0003507: [Test fixture] Should be possible to add annotation to fixture
- 0003504: [Test fixture] Choose fixture size and side when opening fixture module
- 0003495: [Test fixture] Update materials for test fixture
Tweaks:
- 0003505: [Import] Set minimum allowed total thickness for free build to 20µm
- 0003506: [Test fixture] Include board layers in published test fixture
- 0003496: [Test fixture] Update Material thickness of test fixtures
- 0003472: [Test fixture] Make 4 buttons for moving board in fixture
Fixes:
- 0003510: [Import] If excellon drill file has plated slots, the product property doesn't get set
- 0003509: [Import] Adjust/warn soldermask/coverlayer for flex boards
- 0003494: [Import] Zero layer boards gets solder mask color as green as standard
- 0003493: [Panelization] Wrong route width in panel if non-standard outer tool diameter
- 0003500: [Test fixture] Guide pin count incorrect after deletion
- 0003488: [Test fixture] Test fixture holes should not appear as unplated

Build 1.4.1.57 (05-09-2016)
Tweaks:
- 0003467: [Test fixture] When generating top test fixture, press hole should be slot
Fixes:
- 0003466: [Import] Empty Gerber level can lead to following features with wrong color polarity

Build 1.4.0.56 (29-08-2016)
New functionality:
- 0003372: [Test fixture] Test fixture creator
Fixes:
- 0003457: [Import] min buried diameter size is not set
- 0003446: [Import] In some ODB++ cases, polygons are not visible
- 0003442: [Import] Unable to import drill file with comments that begin with # character
- 0003427: [Import] Est. min features hangs if contour file contains drawing frame
- 0003445: [Panelization] Copper fill checkboxes not set correctly if copper fill is in a script
- 0003444: [Panelization] Clearance from Cu fill to frame objects missing in some cases

Build 1.3.4.55 (04-08-2016)
Fixes:
- 0003433: [Import] Qty buried via depths does not get saved
- 0003436: [Panelization] For panels with copper fill, openings are not added for frame objects
- 0003437: [Pro version] Surface finish cost not correctly calculated in some cases

Build 1.3.3.54 (09-06-2016)
Fixes:
- 0003395: [Browser] Exported NCD drill file has too many M71 and G90 lines
- 0003398: [Panel] Placement error when rotating board in panel with V-cut
- 0003389: [Panel] Break-off tabs missing from exported Gerber files
- 0003397: [Pro version] Curve editor: Out of range error on point-to-point curve
- 0003396: [Pro version] Price editor: Extra cost colors are not saved properly

Build 1.3.2.53 (24-05-2016)
Fixes:
- 0003384: [Browser] Default filename when saving panel drawing should reflect product name
- 0003385: [Panel] Contour is wrong if panel has rounded corners

Build 1.3.1.52 (12-05-2016)
Fixes:
- 0003381: [Pro version] invalid integer value error when opening quotation archive

Build 1.3.0.49 (13-04-2016)
New functionality:
- 0003283: [Assembly Data] More simplified workflow
- 0003235: [Assembly Data] Various improvements for BOM processing
- 0003298: [Import] It should be possible to align PnP layers independently of each other
- 0003274: [Import] Beveled edge specification
- 0003265: [Import] Parse PnP files from Expedition
- 0003256: [Import] Add support for additional product specifications and statistics
- 0003196: [Import] Allow 180 and 270 rotation of manuf ident mark
- 0002267: [Import] Add "flex" as a Board type in Custom Stackup
- 0001867: [Import] Stackup viewer/pdf. Add view/selection of cores and prepreg
- 0003161: [Other] Export drill files in Excellon format
- 0003198: [Panelization] Add functionality for adding remarks in panel module
- 0003195: [Panelization] Allow legend text to be placed within boards in panel
- 0003219: [Pro version] It should be possible to get prices for panels by qty boards
- 0003315: [Stencil] Check if reduced paste data and original paste data vary in size
- 0003207: [Stencil] Add ability to edit/split rotated shapes
- 0002911: [Stencil] Ability to transfer objects from any layer to paste mask
- 0003248: [Stencil] When showing possible fiducials add option to set as fiducials
- 0003001: [Viewer] Press D to highlight min tracks or A to highlight min annular rings
Tweaks:
- 0003241: [Assembly Data] When importing Pnp file show file name when asking for side
- 0003303: [Import] Selecting contour give many similar warnings
- 0003321: [Import] Set checkboxes and board type according to selected layers/features
- 0003285: [Import] Change thickness for 1080 prepreg to 70um
- 0003272: [Import] Warn for flex/rigid-flex boards in combination with HASL
- 0003257: [Import] Highlight specs and stats that can affect price or manufacturability
- 0003232: [Import] Add checks for MBB
- 0003213: [Import] Allow import of products with tracks/iso below 100um
- 0003189: [Import] Allow larger error margin when detecting too large contour cutter diameter
- 0003142: [Import] Selecting contour. Adjust popup when tool size should be changed
- 0003129: [Import] Inner layer menus don't automatically expand with autolinked high layer count
- 0003125: [Import] When linking/unlinking SM/notation layers, colors should be set appropriately
- 0003065: [Import] Stackup definitions should refer to IPC-4101 (no revision letter)
- 0003308: [Other] Make hyperlinks of URLs in What's New panel of update wizard
- 0003309: [Panelization] Add board thickness to panel report
- 0003233: [Panelization] For MBB, mousebite holes should use larger hole size by default
- 0003320: [Stencil] Stencil side indicators were placed randomly
- 0003316: [Stencil] It is not possible to undo after having deleted objects from a paste layer
- 0003160: [Stencil] "Copper as reference"
- 0003337: [Viewer] Show flex cover layer when choosing top/bottom side view
- 0003347: [Viewer] Show exact coordinate values when press 'x' to snap to nearest feature
Fixes:
- 0003318: [Import] Problems with ODB++
- 0003266: [Import] Hard to see drill layers
- 0003264: [Import] Cannot export ODB++ with rotated rounded rectangles to Gerber
- 0003262: [Import] ODB++ v8 file does not scale properly
- 0003218: [Import] Ignore undefinded unused d-codes
- 0003136: [Import] Use largest pad to find annular when multiple pads are colocated
- 0003260: [Object Structure] Round inner contour disappears after publish
- 0003284: [Panelization] Pnp fiducial position is wrong when making changes to boards in x/y
- 0003252: [Stencil] Wrong reference pad is found when reducing some pads
- 0003209: [Stencil] On select stencil outline from data, objects overlapping data gets deleted
- 0003297: [Viewer] Thermal apertures incorrectly affect display of nearby objects

Build 1.2.13.48 (29-06-2015)
Fixes:
- 0003082: [Import] Access violation when saving imported product
- 0003073: [Import] ODB++ files with chamfered corner rectangle pads can't publish
- 0003074: [Viewer] Rectangle pads with chamfered corners are shown with rounded corners

Build 1.2.12.47 (18-06-2015)
Tweaks:
- 0003076: [Browser] Gerber export: readme.txt should specify that unplated holes are square
- 0003050: [Panelization] Remove copper fill around fiducials on inner layers
Fixes:
- 0003075: [Browser] Panel tooling holes missing on Gerber export
- 0003077: [Panel] Panel outline error
- 0003081: [Stencil] Splitting of pads causes access violation

Build 1.2.11.46 (30-04-2015)
New functionality:
- 0003052: [Panelization] Allow fiducial to be placed relative to boards in panel
Tweaks:
- 0003049: [Assembly Data] Input BOM column type guess should not override column header text
- 0003042: [Panelization] Add Remove all option to all Remove-buttons
- 0003041: [Panelization] Script manager: Change default settings to fiducial objects
- 0003040: [Panelization] Allow larger offset on breakoff tabs
Fixes:
- 0003053: [Panelization] The registration control coupon sometimes moves to outside of panel
- 0003039: [Product browser] Mouse scroll in product history listes does not work
- 0003047: [Viewer] Error at product view
- 0003046: [Viewer] Padstack report is not enabled for frame objects in a panel
- 0003044: [Viewer] Product view on product 185248 gives an error

Build 1.2.10.45 (14-04-2015)
Fixes:
- 0003043: [Viewer] Slots created in import module disappear from product

Build 1.2.10.44 (13-04-2015)
Fixes:
- 0003038: [Browser] Access violation when opening Assembly Data Manager
- 0003037: [Browser] PnP component rotations incorrect in panel with rotated boards
- 0003028: [Import] Drill file with D7x in header not recognized as drill file
- 0003026: [Import] Lines to arc conversion fails
- 0003022: [Import] Automatic contour claims to create contour without doing so
- 0002937: [Other] Stackup drawing does not handle double-plated buried vias well
- 0003029: [Panelization] Problem with scoring in multiple product panel

Build 1.2.9.43 (26-03-2015)
Fixes:
- 0003028: [Import] Drill file with D7x in header not recognized as drill file
- 0003026: [Import] Lines to arc conversion fails
- 0003022: [Import] Automatic contour claims to create contour without doing so
- 0002937: [Other] Stackup drawing does not handle double-plated buried vias well
- 0003032: [Stencil] Zooming to paste top fails for panels
- 0003031: [Stencil] Panel with PnP data caused out of bounds error
- 0003011: [Stencil] Frame objects are deleted when top/bottom instances are moved to overlap the objects
- 0002537: [Stencil] Top and bottom paste on the same stencil product does not work with Panels

Build 1.2.8.41 (17-03-2015)
Fixes:
- 0003027: [Browser] Exporting to Gerber creates invalid D-code between 1 and 9

Build 1.2.7.40 (26-02-2015)
Fixes:
- 0003018: [Import] Number of copper layers reverts to wrong even after setting desired value
- 0003017: [Import] Remark layer disappears
- 0003019: [Panelization] Panelizing a board without any holes gives incorrect minimum hole
- 0003016: [Panelization] Chamfered corners interfere with boards on panel
- 0003014: [Stencil] Rotated rectangles not drawn nicely when zoomed out
- 0003013: [Stencil] Zooming to individual positioned top and bottom data fails in some cases

Build 1.2.6.39 (20-01-2015)
Fixes:
- 0002991: [Panel] Illegal route width when creating panel

Build 1.2.5.38 (14-01-2015)
Fixes:
- 0002979: [Import] Comment text causes drill tool sizes to be read as mm instead of inch
- 0002976: [Stencil] No stencil frame error message

Build 1.2.4.37 (22-12-2014)
New functionality:
- 0002971: [Assembly Data] Mark components as Do Not Install
- 0002741: [Stencil] Define initial settings for stencil creator
- 0002972: [Viewer] Show objects as outline/centerline
Tweaks:
- 0002968: [Assembly Data] Add parser for pick and place files from Orcad and Supermax E-CAD
- 0002969: [Import] Add search functionality to View file as text dialog box
- 0002966: [Import] Improved detection of outer/inner contours with tool too large for contour
- 0002944: [Import] Parse drill file coordinate format from METRIC/INCH command, if given
- 0002942: [Price] Support for very large quantities (up to 999M) [Pro version only]
- 0002973: [Viewer] Change shortcut keys for viewing copper layers
Fixes:
- 0002967: [Assembly Data] Some Allegro and Cadstar pick and place files are not recognized properly
- 0002959: [Import] Problems with ODB++
- 0002933: [Import] When adding marks on notation layer, be sure that the the gerber set is dark/positive
- 0002931: [Import] Ground plane missing from ODB++ job on publish
- 0002939: [Browser] Stackup definition should not show in description (when custom stackup)
- 0002950: [Stencil] Adjustment with original stencil as reference, loses corner rounding
- 0002934: [Stencil] Not able to import stencil scripts
- 0002932: [Stencil] Script manager: Auto horz/vert does not change the caption of x/y offset spin edit

Build 1.2.3.36 (22-10-2014)
Fixes:
- 0002931: [Import] Ground plane missing from ODB++ job on publish
- 0002930: [PriceEditor] Cannot select price curve

Build 1.2.2.35 (20-10-2014)
New functionality:
- 0002928: [Browser] Show tool list for board products
- 0002921: [Import] Show drill tool list for ODB++ jobs
Tweaks:
- 0002919: [Import] Add support for PNP file from Protel
- 0002918: [Import] Force cutter diameter to 1.0, 1.6, 2.0 or 2.4 for outer contour
- 0002910: [Import] Add support for PNP file from Allegro
Fixes:
- 0002922: [Browser] Incorrect minimum hole in Layout Documentation for ODB++ job
- 0002927: [Import] Minimum annular ring calculated incorrectly for some complex aperture macro pads
- 0002926: [Import] Ring aperture gets drawn in wrong sequence after initial display
- 0002920: [Import] Incorrect minimum hole for ODB++ file
- 0002917: [Import] Incorrect rotation of mirrored pads
- 0002912: [Import] During UL-mark placement. If right-clicking, UL-mark should not be placed
- 0002924: [Panelization] Tabs covering multiple small segments may come out too small or not at all
- 0002923: [Panelization] Tabs placed on arc segments gets wrong orientation after rotation of instance

Build 1.2.1.34 (09-10-2014) [Pro version only]
Fixes:
- 0002915: [PriceEditor] Wrong seller name when printing quote after having opened price editor
- 0002914: [PriceEditor] Access violation when opening price editor prevents loading prices

Build 1.2.1.33 (24-09-2014)
Tweaks:
- 0002895: [Assembly Data] Add context menu to activate all components
- 0002883: [Assembly Data] Do not reset visible layers when updating PnP view
- 0002885: [Quote] It should be possible to specify parameters such as carbon when creating free specs quote
- 0002882: [Quote] Show 3 decimals for panel/unit/dm² price
- 0002899: [Viewer] Show long filenames as hint in viewer file list
Fixes:
- 0002878: [Assembly Data] Unable to process BOM after pasting data from spreadsheet
- 0002877: [Assembly Data] BOM parser should not find "0." value for valueless components
- 0002907: [Import] Error saving product with scoring
- 0002875: [Import] Autocontour does not check slot width when creating inner contours
- 0002873: [Product browser] Stiffener and cover layers are not included in layout documentation
- 0002904: [Panelization] Settings menu is missing
- 0002854: [Panelization] Incorrect min hole diameter if no mousebite holes in a panel
- 0002892: [Stencil] Height/width texts for obround shapes edit must be exchanged
- 0002891: [Stencil] Scripts created after publish, do not perform global adjustment
- 0002890: [Stencil] Zoom to fit when data placed in individual positions doesn't work in for fiducials in all cases
- 0002889: [Stencil] Selecting similar openings as fiducials, does not show selected when asking for confirmation
- 0002888: [Viewer] Step thicknesses (etch) is not shown in product viewer

Build 1.2.0.32 (08-09-2014)
New functionality:
- 0002777: [Assembly Data] BOM Processor module
- 0002677: [Assembly Data] Allow graphical comments on published products
- 0001888: [Assembly Data] Checklist for Assembly RFQ
- 0001855: [Assembly Data] PnP data management module
- 0002856: [Browser] Allow specifying filenames when exporting to Gerber
- 0002780: [Import] Add support for latest version of Extended Gerber with File and Aperture Attributes
- 0002776: [Import] Add support for more than 20 inner layers
- 0002737: [Import] Make option for disabling estimation of minimum feature sizes
- 0002496: [Panel] Add table listing shape/size of fiducials and bad marks to panel drawing
- 0002743: [Panel] Add count column and filter to Product Chooser
- 0002642: [Panel] Add placement of tabs by lines
- 0002767: [Panel] Show step distances in panel drawing
- 0002740: [Stencil] Position stencil data with reference to frame edge
- 0002739: [Stencil] Create stencil script after publishing stencil
- 0002719: [Stencil] Add possibility to change shapes
- 0002297: [Stencil] Add info about areas of original and resulting patterns when splitting features
Tweaks:
- 0002826: [Browser] Open Stencil module maximized
- 0002845: [Import] Update Gerber reader/writer to Gerber revision J3
- 0002818: [Import] Make it possible to not show the Edit title block contents window after publish
- 0002822: [Panel] Make it possible to not show the Edit title block contents window after publish.
- 0002815: [Panel] Add fiducials to PnP data, if exists
- 0002813: [Panel] Show tooling hole diameters in panel drawing
- 0002811: [Panel] It should not be possible to save a script with the same name as an existing script
- 0002803: [Panel] Increase copper fill clearance default size for square or cross fiducial marks
- 0002722: [Panel] Documentation layers should not be clipped at board edges when panelizing
- 0002882: [Quote] Show 3 decimals for panel/unit/dm² price
- 0002847: [Stencil] Show frame id as a hint text in the frame list
- 0002836: [Stencil] Remove "Article Number" if the product has no article number
- 0002812: [Stencil] It should not be possible to save a script with the same name as an existing script
- 0002804: [Stencil] Update Stencil Script Manager to handle new positioning methods
- 0002788: [Stencil] It should be possible to specify corner radius when splitting an opening to an array
- 0002762: [Stencil] Identify rotated rectangular shapes to enable corner rounding and splitting
- 0002757: [Stencil] Mirror bottom stencil data on import
- 0002724: [Stencil] Enlarge frame text width
- 0002538: [Stencil] When running stencil scripts, the form flashes and takes long time to update
Fixes:
- 0002850: [Browser] Files stored with earlier versions show paste layers as Kapton layers
- 0002817: [Import] Manuf ID text on bottom is not shown properly relative to rectangle
- 0002809: [Import] Multi-quadrant arcs from ODB++ do not export properly to Gerber
- 0002808: [Import] Full circle arcs in ODB++ files disappear
- 0002807: [Import] Ignore unused shapes when estimating min track/clearance
- 0002798: [Import] Board contents hidden after importing old MOS file
- 0002794: [Import] Parse pick and place files from Cadstar
- 0002779: [Import] Custom stackup is not recovered when opening .mei file
- 0002760: [Import] Add warning of drill tools with zero size
- 0002764: [Import] UL Mark box should map to valid coupon size
- 0002752: [Import] Excellon rout arcs get wrong center point
- 0002766: [Import] List index out of bounds error on ODB++ file
- 0001738: [Import] Parameter macro aperture causes range check error
- 0002797: [Other] Cannot close window (modal dialog hidden behind window)
- 0002772: [Other] Inner contour compensation and sharp corners
- 0002853: [Panel] SQL error when adding test coupon to panel frame
- 0002842: [Panel] Graphical error when displaying corner tabs on sides with zero frame width
- 0002835: [Panel] Moving rectangle is not displayed when placing registration controll coupon
- 0002748: [Panel] Multi-product panel has wrong blind tool count
- 0002860: [Stencil] Show product name and number in the top of the form when opening a product
- 0002857: [Stencil] It is not possible to exit SelectSplit mode
- 0002852: [Stencil] Creating stencil based on panels causes the board data to move outside the panel frame
- 0002838: [Stencil] Auto Zooming does not work properly when top and bottom not in same position
- 0002825: [Stencil] Frame Manager: It is not possible to delete frames
- 0002823: [Stencil] Show possible fiducials does not work corretly
- 0002786: [Stencil] Bottom side holes/contour are not shown if top side layers are visible
- 0002778: [Stencil] Drawn pad converted to wrong shape when opened in Stencil
- 0002761: [Stencil] Check that fiducial d-codes are correct when publish
- 0002756: [Stencil] Various small bugs in d-codes for adding frames
- 0002723: [Stencil] When creating new frames, d-codes for frame text are duplicated
- 0002720: [Stencil] Shape splitter does not work with rotated shapes
- 0002713: [Stencil] Check that Select mode is not pre-set false
- 0002712: [Stencil] In Etch, when removing layers auto-select remove thickness if only one thickness is present
- 0002711: [Stencil] Selection of objects should not be based on boundbox
- 0002536: [Stencil] Display of various reductions disabled for panels
- 0002535: [Stencil] Etching of stencils disbled for panels
- 0002534: [Stencil] Splitting of features not possible for panels
- 0002171: [Stencil] When loading files, they were not shown in viewer
- 0002170: [Stencil] Product number is not correctly inserted when deleting frame text

Build 1.1.7.30 (02-04-2014)
New functionality:
- 0002705: [Panelization] Kapton Tape should be a layer that may be specified in Add Masks
- 0002733: [PRO: PriceEditor] Curve editor: Load target points from curve
- 0002734: [PRO: PriceEditor] Curve editor: Insert/delete row in target points
Tweaks:
- 0002725: [Import] Add support for Round Thermal Rounded in ODB++ parser
- 0002704: [Product browser] Remark layer should be included in PDF Documentation set
Fixes:
- 0002706: [Import] Via plugging: Menu item is missing and text disappears when going to another tab
- 0002699: [Panelization] Copper fill dots on inner layers may occur inside contour on boards with arcs in contour
- 0002735: [PRO: PriceEditor] Curve editor: Cannot create curve from targets if first target x=0

Build 1.1.6.29 (07-03-2014)
Fixes:
- 0002693: [Import] Align drills fails after selecting multiple pads
- 0002694: [PRO: Quote] Can't select more than 10 layers when changing product specs for quote

Build 1.1.5.28 (19-02-2014)
New functionality:
- 0002672: [Import] Add method to fix Pick&Place offset if Gerber and PnP files do not have the same origin
Fixes:
- 0002673: [Import] It is not possible to assign a pick&place file in import filter
- 0002674: [Import] Zooming by mouse wheel does not always retain zoom point
- 0002675: [Panelization] Zooming by mouse wheel does not always retain zoom point
- 0002678: [Panelization] Removal of frame objects can cause layers to be deleted
- 0002676: [Product browser] Zooming by mouse wheel does not retain zoom point

Build 1.1.4.27 (07-02-2014)
New functionality:
- 0002655: [Browser] Allow filtering product (file) list
- 0002656: [Browser] Add feature to search for product file by filename
- 0002140: [PRO: Quote] Implement functionality for specifying impedance control or eltest
Tweaks:
- 0002657: [Import] Improved warning when min feature prevent saving product
- 0002149: [Panel] Calculate qty routs and rout length when saving panel
Fixes:
- 0002619: [Import] Round-off error on minimum track/clearance prevents saving product
- 0002662: [Import] Various issues with selecting track routing
- 0002664: [Import] Placement of marks must be disabled when board is rotated
- 0002637: [Panelization] In some cases copper fill on innerlayers places pad inside the board contour
- 0002638: [Panelization] In some cases some layers are missing from panelized products when exported to gerber
- 0002641: [Panelization] If place tabs is pressed and you zoom (by right mouse click) place tabs mode is abandoned
- 0002659: [Panelization] Floating rectangle for text/barcode/datamatrix is incorrect if the view is rotated
- 0002660: [Panelization] When entering text for barcode or text, the view rotates/mirrors when "r" or "m" is pressed
- 0002624: [Stencil] Dcodes of exported paste files are out of range in some cases
- 0002654: [Stencil] Select subtract deletes objects instead of de-selecting them
- 0002663: [Stencil] Wheel scroll does not work
- 0002658: [Viewer] View top and View bottom menu doesn't select the appropriate layers in Stencil module
- 0002665: [PRO: Quote] Modifying freight price does not change total price

Build 1.1.3.26 (27-01-2014)
Tweaks:
- 0002647: [Pro: Quote] Print "empty" quotation (without prices)
- 0002648: [Pro: Quote] Include total area and total weight in quotation
Fixes:
- 0002619: [Import] Round-off error on minimum track/clearance prevents save
- 0002645: [Import] Inner contour gets incorrect tool diameter after panelization
- 0002637: [Panelization] In some cases copper fill on inner layers places pad inside the board contour
- 0002641: [Panelization] If place tabs is pressed and you zoom (by right mouse click) place tabs mode is abandoned

Build 1.1.2.25 (18-12-2013)
Tweaks:
- 0002611: [Viewer] Ctrl+Alt+Click on hole to open padstack viewer
Fixes:
- 0002617: [Import] Problem interpreting Gerber as drill file without line break between %FS and %MO lines
- 0002618: [Import] Problem parsing Gerber file with implicit NOR01 aperture table
- 0002616: [Stencil] Index error in optimizaton gave false result when reducing pads

Build 1.1.1.23 (12-12-2013)
Tweaks:
- 0002605: [Import] Support import of ODB++ file with empty profile
- 0002600: [Panelization] Reduce dot diameter and spacing on inner layer copper fill
- 0002607: [Viewer] Allow rotate view to rotate 0/90/180/360 degrees
- 0002606: [Viewer] Add vertical scroll bar to help tab in layer list
Fixes:
- 0002602: [Panelization] Copper top layer not visible when publishing panel with copper fill
- 0002598: [Panelization] Cannot place test coupon on panel in certain cases

Build 1.1.0.22 (06-12-2013)
New functionality:
- 0002578: [Import] Add text to board
- 0002576: [Import] View segment endpoints when selecting contour segments
- 0002512: [Import] Add lead-free marking in accordance with J-STD-609A
- 0002081: [Import] Manage/view hpgl files
- 0002047: [Import] Add possibility to select which holes must be plugged and which IPC method to use
- 0001975: [Import] Import ODB++ files
- 0001974: [Import] Draw contour segments graphically
- 0001944: [Import] Assign via plugging from drill tool list
- 0001179: [Import] Place remarks graphically on board
- 0000307: [Import] Auto-estimation of tolerances
- 0002575: [Panelization] Add posibility to enter the size off the opening in copper fill for fiducials
- 0002573: [Panelization] Allow removing vcut from specific edges of panel frame
- 0002119: [Panelization] Possibliity to flip boards upside-down in panel
- 0002549: [Stencil] Make it possible to select etch features from other layers than paste for Region by oversize
- 0002489: [Viewer] For multi-product panels, show Product number layer
- 0002242: [Viewer] Make screendump from Viewer directly
- 0002190: [Viewer] Mirror and/or rotate view
Tweaks:
- 0002569: [Import] It should be possible to click on a drill hole to view its stackup report
- 0002200: [Import] Make it possible to type in exact numbers for min track/space
- 0002574: [Panelization] Enlarge track/spacing in test coupon if copper thickness more than 45um
- 0001926: [Panelization] Cu fill for inner layers should be done with dots, not solid
- 0002597: [Stencil] Change position of top/bottom when both are on the same stencil
- 0002580: [Stencil] In the help text, write the number of selected elements after each selection
Fixes:
- 0002572: [Import] Do not automatically adjust meas. unit in drill file if specified in file
- 0002570: [Import] Cannot change filetype from Text to Gerber
- 0002588: [Stencil] Bug in splitting objects
- 0002563: [Stencil] Pad size calculations are wrong for large pad sizes
- 0002553: [Stencil] Cannot create split opening when there are holes in pad
- 0002536: [Stencil] Display of various reductions disabled for panels (mikkel) - resolved.
- 0002366: [Stencil] Fiducials are selected multiple times if select add is chosen
- 0002292: [Stencil] Stencil does not load frames if server connection has been missing
- 0002554: [Viewer] Buried via layers not shown as drill layers
- 0002592: [Other] Stackup drawing does not scale properly if stackup >4mm thick

Build 1.0.15.21 (17-10-2013)
Fixes:
- 0002557: [Browser] Problem creating archive directory on new installation
- 0002550: [Browser] Problem with display of text in viewer
- 0002548: [Stencil] Some items in the file menu are not linked to the correct functions
- 0002535: [Stencil] Etching of stencils for panels does not work in Gallery

Build 1.0.14.20 (14-10-2013)
Tweaks:
- 0002547: [Product browser] Add column separator lines to contents page of layout documentation set
- 0002545: [Product browser] Include number of layers in product info of layout documentation set
Fixes:
- 0002546: [Import] Cannot save imported product
- 0002541: [Stencil] File|Save as... opens the User Guide instead of saving

Build 1.0.13.19 (08-10-2013)
New functionality:
- 0002532: [Browser] It should be possible to edit an existing panel product
Fixes:
- 0002525: [Browser] The contents of the readme.txt file are incomplete when exporting panel products
- 0002524: [Browser] It's not possible to create a stencil from paste files - only from board products
- 0002523: [Browser] Measuring a panel product in product viewer gives an access violation
- 0002520: [Browser] When clicking on a new product (showing product specs) the edit boxes flash multiple times
- 0002528: [Panel] Should check for break-off tabs before saving panel
- 0002527: [Panel] Default folder for adding products to panel should be Gallery Archive
- 0002526: [Panel] fresedim.txt missing from panelized mif files
- 0002538: [Stencil] When running stencil scripts, the form flashes and takes long time to update
- 0002534: [Stencil] Splitting of features not possible in Gallery for panel products
- 0002533: [Stencil] Stencil scripts do not work with panel products

Build 1.0.12.18 (02-10-2013)
New functionality:
- 0002495: [Browser] It should be possible to open/save products from/to any file location
- 0002470: [Import] Expand Perfag-10 aperture table to include thermal and donut pads
- 0002427: [Panelization] Allow placing registration coupon anywhere on panel frame
Fixes:
- 0002513: [Browser] When viewing a stencil product, the viewer should set paste and frame files visisble
- 0002509: [Browser] When renaming products, the old product name should appear in the edit box
- 0002504: [Browser] Browser product list does not update after importing product from ME
- 0002516: [Import] Cannot add symbols to non-existing legend layer
- 0002491: [Import] It's not possible to select blind/buried vias from the drill-file layer selection popup
- 0002463: [Import] Incorrect file linking with very short common name
- 0002460: [Import] Should be possible to delete Product/Batch No without entering Place Product/Batch No mode
- 0002429: [Import] Some objects are offset in gerber file with incremental coordinates
- 0002416: [Import] Problem selecting more then 9 inner contours
- 0002390: [Import] When selecting an inner contour, it shows as a track routing
- 0002503: [Panel] Incorrect initial directory when saving panel
- 0002471: [Panel] Tab has incorrect rotation if scoring enabled
- 0002431: [Panel] Datamatrix on copper layers not deleted when removing test coupons
- 0002409: [Panel] Show Edit Titleblock Contents dialog only once on panel publish
- 0002404: [Panel] In auto panel, when rename script, write the original name in the edit box
- 0002519: [Stencil] Stencil product not created properly if based on panel product
- 0002508: [Viewer] Space key causes access violation
- 0002469: [Viewer] Inner contour opening is slightly too large
- 0002430: [Viewer] Contour is not displayed properly
- 0002396: [Viewer] Some rout tracks do not show properly in viewer
- 0002502: [Other] Should be more space between vias in stackup drawing

Build 1.0.11.16 (20-06-2013)
New functionality:
- 0002379: [Import] Allow disabling auto-contour
- 0002356: [Import] Add Data Matrix 2-D bar code symbol to board
- 0002359: [Panelization] Allow rotating board 180 degrees in panel with scoring
- 0002358: [Panelization] Add registration control coupon to panel
- 0002357: [Panelization] Add Data Matrix 2-D bar code symbol to panel
- 0002362: [Product browser] Add table of contents page to PDF layout documentation file
- 0002381: [Quote] Should be possible to show any currency exchange rate combination
Fixes:
- 0002387: [Import] Disable minimum features selection for non copper products
- 0002360: [Import] Unplated inner contours do not display properly
- 0002311: [Import] Aperture table dialog should check parsed aperture table after changes
- 0002309: [Import] Arc converted to straight line during auto-contour
- 0002385: [Panelization] Problem with tab placement on panels with scoring and rout
- 0002384: [Panelization] Rout is not always cut at the right place when scoring is selected
- 0002370: [Panelization] Slots larger than 6.3 mm in autopanel scripts are shortened to 6.3 mm
- 0002308: [Panelization] Annotation field always gets the default location and size when defined in scripts
- 0002290: [Panelization] Frame objects should follow frame edges if frame width, instance count or spacing are changed
- 0002347: [Product browser] Filter product list keyword does not work every time
- 0002335: [Stencil] Selection mode buttons are not set correctly after jumping between panels
- 0002304: [Stencil] Incorrect calculations in split stencil opening
- 0002382: [Viewer] Overlapping or colocated donut apertures do not display correctly in the viewer
- 0002313: [Other] Material description does not show in PDF drawing for stackup with aluminum

Build 1.0.10.15 (16-05-2013)
New functionality:
- 0002324: [Import] Import product downloaded from Macaos Enterprise
Fixes:
- 0002279: [Panelization] Frame objects should follow frame edges if copper fill or scoring are changed
- 0002262: [Panelization] Scratch for copper layers if copper filling and scoring extends the board outline
- 0002300: [Viewer] Access violation occurs if a D code that is not defined in the header is referenced

Build 1.0.9.14 (16-04-2013)
Fixes:
- 0002301: [Import] Save to local disk does not work
- 0002279: [Panelization] Frame objects should follow frame edges if copper fill or scoring are changed
- 0002262: [Panelization] Scratch for copper layers if copper filling and scoring extends the board outline
- 0002300: [Viewer] Access violation occurs if a D code that is not defined in the header is referenced

Build 1.0.8.13 (10-04-2013)
New functionality:
- 0002294: [Import] Add Stiffener to Additional layers
- 0002297: [Stencil] Add info about areas of original and resulting patterns when splitting features
Fixes:
- 0002293: [Import] Scoring or track routing incorrect if more than one segment selected
- 0002299: [Panel] Increase solder mask clearance around bad marks on copper
- 0002298: [Panel] Frame objects should follow frame edges if frame width or instance count or spacing are changed
- 0002295: [Panel] Create new script frame object should use parameters of selected object
- 0002296: [Quote] Estimated weight not calculated for aluminum stackups

Build 1.0.7.12 (21-03-2013)
Initial public release